1. Introduc on:
Thank you for choosing the ILT2500. The ILT2500 internal Datalight so ware was designed to be
simplis c enough for easy touch screen opera on and advanced enough to meet the needs of
researchers and scien sts. The ILT2500 works with hundreds of sensor/filter/op c combina ons and
can be run using internal or PC so ware making it extremely versa le.
The ILT2500 System includes:
A. ILT2500 Meter –
Auto ranging meter
.
B. USB Cable -
Micro and Mini USB cables for charging, so ware control and data retrieval.
C. CC200 Case–
Protec ve carrying/shipping case.
D. Electrical Calibra on Cer ficate
– N.I.S.T. Traceable/ISO17025 accredited
.
E. Datalight III PC/Mac computer so8ware-Free download on ILT website:
h3ps://www.intl-ligh3ech.com/support/so ware
All systems should be run using FW 3.1.4.7 or higher.
F. Sensor /detector (separate purchase required/sold separately).
Note: Instruc ons manuals and Datalight III so ware downloads are located on the ILT website:
h3p://www.intl-ligh3ech.com/support.
2.
System Specifica ons:
A. Dynamic Range:
1 pA to 1 mA,
Calibrated Range:
5
pA to 1 mA(pending final QC)
B. Display:
4.3", 480x272, TFT Color LCD, Touch enabled, Backlit
C. Opera ng Temperature:
0-40 Deg C
D. Storage Temperature:
-10 – 45 Deg C
E. Memory:
4GB microSD
F. USB Current Draw:
Typical: 500mA Max:900mA (USB 3.0)
G. Bias:
Programmable 5V bias
H. Time:
H1. Sample Time:
Select Auto, Fast, .1sec to 5 seconds or use Auto (based on light level)
H2. Recording Interval:
Select from stream(500 samples a second),“Sample” to match the
“Sample Time” noted above or select from 1 second up to 1 hour intervals
H3. Chart Update Time (Trend):
Select from .1 seconds up to once per hour
H4. Flash sample me:
Integrates up to 3000 readings per second
H5. Beacon:
Frequency .3-1.4 Hz
I. Dimension and Wieght :
3 x 6 x 1.5”, .8 lbs
3. Quick Reference Guide:
3A. Front:
The front panel of the ILT2500 is a full color 4.3"
capaci ve TFT touch screen display. The display is a sensi ve
electronic device. It should not be exposed to sharp objects,
harsh environments, chemicals, liquids etc.
3B. Rear:
On the back of the ILT2500 is a stand which is
opened by grasping at the two finger slots and gently li ing
the stand up. The stand has small posts that slide along the
housing to open and close. No force should be applied to
the stand during opening and closing. When the stand is in use, no pressure should be applied to the
ILT2500 INSTRUMENTATION MANUAL Preliminary 8/18 3 OF 22
