S T A R G e n 2 R e c e i v e r U s e r ’ s G u i d e
Page 7 of 47
The Rear Panels – STAR-Four & STAR-Two
[1]
Grounding
[2]
Mains AC 100-240v built in fuse 2.5A
[3]
Alarm contacts (3)
[4]
Audio In (Future use)
[5]
Audio Channels & Relays 1, 2, 3 & 4
[6]
ASI In or ASI Out [Factory installed option]
[7]
Data LAN
[8]
RS232 Comm port
[9]
Monitor & Control LAN
[10]
L-band input and loopthrough
[11]
SD card slot
[12]
Recovery reset
Default Settings
Your STAR receiver is supplied with these default settings:
1. Control mode is:
remote
2. IP mode is:
DHCP
First Installation and Configuration of the STAR
1. Connect power to the power inlet without connecting the L-band cable to your STAR receiver. The front
panel LCD will show
“Star Four G2 Booting OS”.
The LEDs on the front panel show (on the left):
2. After a few seconds all LEDs flash once and the LCD screen will display
“Initializing”.
When initialization
is complete after a few seconds, the LEDs show (on the right), with no external connections:
1
3
5A
5C
7
9
10
12
11
8
4
2
5B
5D
6
