S T A R G e n 2 R e c e i v e r U s e r ’ s G u i d e
Page 25 of 47
Utility
There are 9 submenus: CLOCK, CLEAR LOG, PRINT SETTINGS, DEFAULT SETTINGS,
IMPORT/EXPORT, FORMAT SD CARD, SCHEDULE, TRIGGER, INSTALL OPTIONS, UPDATE
FIRMWARE & REBOOT DEVICE.
CLOCK:
The unit clock can be switched on. The clock can be set Manualy; synchronized with the
NTP or with SNTP over the management LAN. To use NTP, the NTP PID must be configured in
the DVB-TS PID List. The IP address/Port for the SNTP server and the refresh interval can be
configured in the menu
CONTROL>MGMT IP.
CLEAR LOG:
The log file can be cleared.
PRINT SETTINGS:
The complete settings of the unit can be printed in one overview.
DEFAULT SETTINGS:
The default settings can be loaded.
Warning: Loading the default settings reboots the receiver resulting in IP service downtime.
The
settings of the LINK, TCP/IP and NAME group of
CONTROL IP TCP/IP
will
not
be reset to the default
value in order to be able to reconnect to the device again.
IMPORT/EXPORT:
All settings of this unit can be exported in a file (binary format) to a selectable
location and a user editable filename. The same settings file can be imported as well, to make an
easy copy possible. When imported, a tickbox can be selected to choose if the IP settings and
Identity have to be excluded.
FORMAT SD CARD: Erase all files on the card and refresh the file structure. Equivalent to a
disk format. All content files are lost.
SCHEDULE: A channel can be recorded and the recording played back anytime within 24 hours
of the recording start time on the decoder of choice using the Time Shift option. For longer
playback delays, or multiple playbacks of the same recording use the Date and Time option. The
Reports option allows viewing or printing of all recorded events and playbacks with complete
status information. The use of the Schedule tab is fully explained in the Advanced Topics
section.
TRIGGER:
A decoder or All Decoders can be selected.
A full list of all utility triggers can be
viewed from the All Decoders page or by using the View the full List for ALL decoders radio
button on any decoder trigger page. No triggers can be fired from the full list page; triggers can
be selected from a list of available triggers loaded by the head end and fired on the specific
decoder page only.
