S T A R G e n 2 R e c e i v e r U s e r ’ s G u i d e
Page 29 of 47
Advanced Topics
Using your PMR
The PMR capabilities of the Star 4 G2 audio receiver are subject to license restrictions and these pages and
option tabs will not appear in your receiver unless properly licensed. To see which options are installed on your
unit go to STATUS>DEVICE CONFIG and look under Device Options at the bottom of the page.
Time Shifting
Time shifting allows programming to be recorded and played back at a later time within the next 24 hours. To
create a Time shift event go to UTILITY>Schedule>Time Shift and click the Add button to open up a new event
line in the schedule (see below). Complete the entries for Days of the Week; Start and Stop time; Channel to be
recorded, Name, up to 16 characters (if required) and Data PIDs. This specifies the programming that will be
recorded.
To setup the playback, chose a playback time and decoder for the playback and click the disc symbol
to
save the entry. Up to 20 such Time Shift events can be created.
NOTE:
Recordings may not overlap
The minimum time shift is 10 seconds and the maximum 24hours (from the recording start time).
If the entered playback time is less than the recording time, playback will be on the following day.
Playback start time uses receiver time.
Recording can be set as disabled until required.
Only one playback is allowed per recording.
Simultaneous playback of two programs on one decoder is not allowed.
