S T A R G e n 2 R e c e i v e r U s e r ’ s G u i d e
Page 18 of 47
Control MGMT Notification Priority
Select the priority for the notifcation of an alarm in a parameter. Each parameter shown on the Control MGMT
Notification Mode Alarm Mode list can be assigned a priority between 1 and 4294967295 with 1 being the
highest priority. The default value is 0 and indicates No Priority
Control MGMT Notification Destination
Enable/Disable notifications to the chosen SNMP destinations.
Control I/O
This will allow operators to view and change the status of the contacts manually for testing. Please note that
Decoder Data Process needs to be switched to OFF. (Support depends on the device configuration).
Control ACMM
View and enter the Trigger PID parameters and the PID, IP address and corresponding port for each of
the XD packet streams received by your Star receiver. Do not change these parameters without
consulting your Service Operator.
ENABLE /DISABLE: Enable/Disable participation in network-wide trigger activation.
Note: Allow or prevent triggering of receiver by head end regardless of channel being played.
TRIGGER PID: PID containing trigger list.
