Intermec XMLLabel, User Manual

Page: 57 / 62

Chapter 4 — Troubleshooting
XMLLabel v6.10 User’s Guide 49
Troubleshooting Problems and Possible Solutions
(continued)
Problem Possible Solution
You send a label to
the printer and
nothing happens.
(General) Hardware printing or printing service problem.
Check the printer’s network connection.
The printer power switch is turned off. Make
sure the printer power switch is turned on.
The .lbx file is not available in the printer. Use
Label Loader to send the .lbx file to the
printer.
A label prints, but
there are problems
with the data or a
field does not
print. There may be a problem with the setup. If you
see a variable on the label that is not replaced
by any data, check Define Label Format setup.
Make sure the variables in LabelShop PRO
and the host system are identical. Check for
capitalization and space characters.
If the variable text does not print correctly,
check that the printer font supports the
character set of the database or the encoding
used in the host application.
The printer does
not appear as
expected when you
scan the network. There may be a problem with the network
setup. Check the following items:
•
Make sure your PC does not have an active
firewall and that it allows SNMP traffic on
the network.
•
You may be using the wrong community
setting. Check the community setting in
the Scan for printers dialog box. For help,
see your network administrator.
•
The router may drop broadcast packages if
you are scanning for printers outside your
local network segment. Try specifying your
IP addresses manually instead of using
broadcast. See page 41 for help on how to
enter an IP address manually.
•
Your printer model or firmware version are
not supported by XMLLabel.