Intermec XMLLabel, User Manual

Page: 21 / 62

Chapter 1 — Getting Started
XMLLabel v6.10 User’s Guide 13
Setting Up Printers in SAP Auto-ID Infrastructure
XMLLabel supports Auto-ID Infrastructure (AII) version 2.1.
To use Intermec XMLReady printers with SAP AII, you need to
configure the parameters in the following procedure.
To find all of these settings, go to Basic Settings in the SAP AII
interface.
To set up printers in SAP AII
1 Set EPC Settings to EPC_1.27.
2 Define RFC connections for the RFID printers:
a For TCP/IP printing, set these parameters:
Parameter Value
Type T (TCP/IP)
Gateway Host IP address of the printer
Gateway Service Port 9200
b
For HTTP printing, set these parameters:
Parameter Value
Type G (HTTP)
Target Host IP address of the printer
Service 80
Prefix /xml/pv
Activate HTTP Services Enable
3 Make sure the name of the LabelShop variable (EPC) is the
same as the AII variable (EPC), which contains the 96 or 64
bit data as a hexadecimal string.
These RFID parameters are just the basic settings you need to
configure to use XMLLabel with AII. Please see your AII
documentation for other required settings and additional
information.