Intermec Trakker T2090, User Manual

Page: 39 / 246

User Interface
2-7
2
XFER.EXE
This is a custom version of TRANSFER.EXE which waits for the T2090 to be
placed in the dock. This utility should be used to initiate XMODEM transfers
on the T2090. It does not run on a PC.
Syntax
c> xfer {options} filename
where options are:
-r
Receive file
-s Send file
-B# Sets the baud rate to 300, 1200, 2400, 4800, 9600, 19200, 38400, 57600,
or 115200 (Default = 9600)
-COM# Specify COM port 1 (must be 1) (Default)
REMSERV.EXE, REMOTE.BAT, and RT.BAT
Provides remote disk access to a server via the COM port. The program
REMDISK.EXE must be run on the remote server for this program to function
properly. This file is accessed through the batch file REMOTE.BAT, which
eliminates the need for the colon (:) and slash (/) keys in the parameters.
Alternatively, the RT.BAT file will start the remote, exporting the C:\ drive at
38400 bps.
Syntax
c>remote { drive} [Bnnnn] [COMn] [T]
where:
drive Letter designation for the T2090 drive now seen as the next logical
drive to the host system.
Bnnnn Baud rate 300, 1200, 2400, 4800, 9600, 19200, 38400, 57600, or 115200
(Default = 115K) All baud rates above 9600 use the packet
transm in remdisk) option automatically.
COMn Port number 1 or 2 (Default = 1).
T Communications Timeout value ( in seconds 2 - 3640). You should
always use /T10 or greater.
? Help
Alternate Syntax
c>rt nnnn
where nnnn is the baud rate without the B. The default baud rate is 38400 or
38.4k baud.