Intermec Trakker T2090, User Manual

Page: 140 / 246

TRAKKER T2090 Hand-Held Batch Computer User’s Manual
1
XJJ
Co d e 39
5-14
Rename File
Purpose: Renames a file stored on the T2090 computer.
From COM Port:
...-
drive:oldfilename,drive:newfilename
where:
...-
is the command to rename a file.
drive: indicates the drive where the oldfilename is stored. You must
include the colon (:) after the drive letter.
oldfilename is the name of the file you want to rename.
drive: indicates the drive where the newfilename is stored. You must
include the colon (:) after the drive letter. The drive letter
MUST
match the drive letter you entered for the oldfilename.
newfilename is the new name of the file.
Scan: 1. Scan this bar code label:
Enter Accumulate Mode / Rename File
*+/...-*
*+/...-*
2. Scan the bar code label(s) for the file you want to rename. You can scan
labels from the “Full ASCII Charts” in Appendix C. The label must use this
format:
drive:oldfilename,drive:newfilename
3. Scan this bar code label to exit Accumulate mode and rename the file.
Exit Accumulate Mode
*-/*
*-/*
Or:
You can create your own bar code labels to rename files by creating a bar code
in this command format:
...- drive:oldfilename,drive:newfilename
Example: To rename the file
SHIPPING.EXE
on drive C to
DOCK1.EXE
, use this command:
...-c:shipping.exe,c:dock1.exe