Intermec Trakker T2090, User Manual

Page: 151 / 246

Configuration Command Reference
6-7
6
Automatic Shutoff
Purpose: Defines the maximum length of time the computer remains on when there is no
activity. When you do not use the computer for the length of time set with this
command, the computer automatically turns off as if you had pressed
L
to
turn it off.
When you press
L
to turn on the computer, the computer either resumes
exactly where it was when you turned it off or the computer boots and restarts
your application. Resume is controlled through the Resume Execution
command. For help, see “Resume Execution” later in this chapter.
Power Management Tip: You should use the Automatic Shutoff feature to preserve
the battery pack’s power.
Syntax: EZdata
Acceptable values for data are one or two digits:
0 Disabled (always on)
1-15 Shutoff time in minutes
Default: Disabled
Scan: To disable automatic shutoff, scan this bar code:
Disable Automatic Shutoff
*$+EZ0*
*$+EZ0*
Or: To set a timeout:
1. Scan this bar code:
Enter Accumulate Mode / Set Automatic Shutoff
*+/$+EZ*
*+/$+EZ*
2. Scan a numeric value for data from these bar codes:
*0* *1*
*0* *1*
*2* *3*
*2* *3*