Intermec Norand 6920 Reference Manual Download

Page: 150 / 232

Error Messages

SECTION 6

6-66 Norand

6920 Communications Server Reference Manual

Table 6Ć27 (Continued)

Windows NT System Errors

Code #

Name and Meaning

1247 0x04DF

ERROR_ALREADY_INITIALIZED

An attempt was made to perform an initialization operation when

initialization has already been completed.

1248 0x04E0

ERROR_NO_MORE_DEVICES

No more local devices.

1300 0x0514

ERROR_NOT_ALL_ASSIGNED

Not all privileges referenced are assigned to the caller.

1301 0x0515

ERROR_SOME_NOT_MAPPED

Some mapping between account names and security IDs was not

done.

1302 0x0516

ERROR_NO_QUOTAS_FOR_ACCOUNT

No system quota limits are specifically set for this account.

1303 0x0517

ERROR_LOCAL_USER_SESSION_KEY

No encryption key is available. A wellĆknown encryption key was

returned.

1304 0x0518

ERROR_NULL_LM_PASSWORD

The password is too complex to be converted to a LAN Manager

password. The LAN Manager password returned is a NULL

string.

1305 0x0519

ERROR_UNKNOWN_REVISION

The revision level is unknown.

1306 0x051A

ERROR_REVISION_MISMATCH

Indicates two revision levels are incompatible.

1307 0x051B

ERROR_INVALID_OWNER

This security ID may not be assigned as the owner of this object.

1308 0x051C

ERROR_INVALID_PRIMARY_GROUP

This security ID may not be assigned as the primary group of an

object.

1309 0x051D

ERROR_NO_IMPERSONATION_TOKEN

An attempt has been made to operate on an impersonation token

by a thread that is not currently impersonating a client.

Summary of Contents for Norand 6920









































































































































































































































Search results

Summary of Contents for Norand 6920

Reviews:

Related manuals for Norand 6920

Brands by name

Popular brands

Intermec Norand 6920, Reference Manual

Search results

Summary of Contents for Norand 6920

Reviews:

Related manuals for Norand 6920

Brands by name

Popular brands