Intermec Norand 6920 Reference Manual Download Page 87

Page: 87 / 232

SECTION 6

Error Messages

Norand

6920 Communications Server Reference Manual 6-3

System Errors

Table 6Ć1

Standard Errors

Error

Name, Message, Meaning, and Solutions

0x0002

E_SYS_NOENT

No such file or directory.

Meaning:

File or directory specified does not exist.

Solutions:

Ensure file name is typed correctly and is in the current or

specified directory.

0x000D

E_SYS_ACCES

Permission denied.

Meaning:

Attempt made to write to file marked readĆonly.

Solutions:

Remove readĆonly attribute from file. See ATTRIB" in

operating system's reference manual.

Table 6Ć2

Request Database Errors

Error

Name, Message, Meaning, and Solutions

0x0201

E_RQ_EOF

End of terminal/request data.

Meaning:

Normal error code returned from request database interface

when endĆofĆdata condition reached.

Solutions:

No corrective action necessary.

0x0202

E_RQ_NOT_FOUND Terminal/request not found.

Meaning:

Computer or request specified not existing in request

database.

Solutions:

Add computer or request to database.

0x0203

E_RQ_FILE

Data file error.

Meaning:

Error occurred while opening or reading user data file.

Solutions:

Ensure file exists and in current export directory.

Provide DOWNLOAD FILE (SESSION.CTL) for Customer

Support to look at problem.

0x0204

E_RQ_LOCK

Request record is locked.

Meaning:

Database was locked by another process.

Solutions:

None.

Summary of Contents for Norand 6920









































































































































































































































Search results

Summary of Contents for Norand 6920

Reviews:

Related manuals for Norand 6920

Brands by name

Popular brands

Intermec Norand 6920, Reference Manual

Search results

Summary of Contents for Norand 6920

Reviews:

Related manuals for Norand 6920

Brands by name

Popular brands