Intermec Norand 6920 Reference Manual Download Page 104

Page: 104 / 232

Error Messages

SECTION 6

6-20 Norand

6920 Communications Server Reference Manual

Table 6Ć9 (Continued)

C_PLN_DATA Errors

Error

Name, Message, Meaning, and Solutions

0x120B

E_PLN_INV_PATH Invalid file path

Meaning:

An invalid path was found on a file.

Solutions:

Correct path and reformat.

0x120C

E_PLN_BAD_DATA Bad data found in file.

Meaning:

Bad data was found in a PL/N file, the data could not be

formatted.

Solutions:

In Upload, the UPLFMT.CTL table may not match upload

data. Correct either the table or the handĆheld computer

application.

In Download, correct the data and reformat.

Table 6Ć10

C_DATA_FILE Errors

Error

Name, Message, Meaning, and Solutions

0x1300

E_DATA_GENERAL Data file error.

Meaning:

Program error occurred while data file processed.

Solutions:

Call Customer Support.

0x1301

E_DATA_READ

Data file read error.

Meaning:

Error occurred while file read.

Solutions:

Verify file exists in current directory and not corrupted.

Ensure hard disk not corrupted. See SCANDISK" in

operating system's reference manual.

0x1302

E_DATA_WRITE

Data file write error.

Meaning:

Error occurred while file written.

Solutions:

Verify file exists in current directory and not corrupted.

Ensure hard disk not corrupted. See SCANDISK" in

operating system's reference manual.

Summary of Contents for Norand 6920









































































































































































































































Search results

Summary of Contents for Norand 6920

Reviews:

Related manuals for Norand 6920

Brands by name

Popular brands

Intermec Norand 6920, Reference Manual

Search results

Summary of Contents for Norand 6920

Reviews:

Related manuals for Norand 6920

Brands by name

Popular brands