Intermec Norand 6920 Reference Manual Download

Page: 206 / 232

Protocol Servers

SECTION 8

8-8 Norand

6920 Communications Server Reference Manual

Table 8Ć1 (Continued)

NRInet Error Codes (Client Protocol)

Error

Code

Corrective Action

Error

Description

807

Negotiation

failed

between

Client and

Server.

Verify the Client NRINET version is compatible with the

host server version you are using.

808

Negotiation

failed

between

Client and

Server. Sent

invalid block

size.

Verify that the Client NRINET version is compatible with

the host server version you are using.

809

Invalid

pointer sent

InetRecv()

InetSend()

Negotiation

failed

between

Client and

Server.

Contact client application programmer.

810

Server Busy.

Wait for server to free up a connection and try again.

Client does this automatically unless interrupted.

811

Data block

send timeout.

1. Ensure the host server software is running correctly.

2. Check all cables and network connections.

3. Repeatedly ping the server to confirm constant

connectivity.

4. Call Customer Support.

Summary of Contents for Norand 6920









































































































































































































































Search results

Summary of Contents for Norand 6920

Reviews:

Related manuals for Norand 6920

Brands by name

Popular brands

Intermec Norand 6920, Reference Manual

Search results

Summary of Contents for Norand 6920

Reviews:

Related manuals for Norand 6920

Brands by name

Popular brands