RS-232—Output to host system
132
MB/NX/RM/00/E/970131
ENQ enquiry character
Scanning ENQ activates the ENQ protocol.
If ENQ is not used, the MicroBar NX transmits barcode data without waiting for a request
from the host system.
If an ENQ character is activated, the MicroBar NX waits to receive the ENQ character from
the host system before transmitting data after a good read. If no character is received
before the end of the specified timeout (
Ð
Hardware/software protocols timeout above in
this section), the data is not transmitted and the MicroBar NX emits 6 error beeps.
Not Used (*)
ENQ (HEX 05)
To use a different character for ENQ:
1. Scan Compose Other ENQ Character.
2. Scan the desired character code (
Ð
ASCII character codes).
Compose Other ENQ Character
Summary of Contents for MicroBar NX
Page 1: ...MB NX RM 00 E 970131 M i c r o B a r N X Reference Manual Preliminary Edition January 1997...
Page 10: ...Contents x Contents MB NX RM 00 E 970131...
Page 177: ...Symbologies EAN 128 MB NX RM 00 E 970131 167 Symbologies EAN 128 Symbologies Code 128 EAN 128...
Page 201: ...MB NX RM 00 E 970131 Number codes 1 2 3 4 5 6 7 8 9 0 End Selection...