RS-232—Slave mode
140
MB/NX/RM/00/E/970131
RS-232—Slave mode
Activation
Slave mode allows the MicroBar NX to be configured or controlled directly by the terminal
host system via the RS-232 output port.
N° 105 - RS-232 Slave Mode
How to use slave mode
1. Activate slave mode
Scan the N° 105 - RS-232 Slave Mode code and reconfigure the
standard RS-232 output parameters to suit your system if required.
2. Obtain the desired command strings
Put the MicroBar NX into Display Data String Mode
(
Ð
Configuration modes - Display data string mode) and read the
codes you want the host to transmit. The full data string (command
and checksum) of each code you read is displayed on the terminal
screen.
Example
Reading the Code 39 activation code in Display Data String Mode will
display the data string:
\41\4C\60\5E
In this example, "\41\4C\60" is the command and "\5E" is the checksum.
Summary of Contents for MicroBar NX
Page 1: ...MB NX RM 00 E 970131 M i c r o B a r N X Reference Manual Preliminary Edition January 1997...
Page 10: ...Contents x Contents MB NX RM 00 E 970131...
Page 177: ...Symbologies EAN 128 MB NX RM 00 E 970131 167 Symbologies EAN 128 Symbologies Code 128 EAN 128...
Page 201: ...MB NX RM 00 E 970131 Number codes 1 2 3 4 5 6 7 8 9 0 End Selection...
