Configuration modes
MB/NX/RM/00/E/970131
31
Display data string mode
Display Data String Mode allows you to display the data string values and checksum for
configuration bar codes on a terminal screen. The configuration codes in this manual are in
Code 128 format.
Data string values are displayed in hexadecimal and are separated by backslashes or other
characters depending on your terminal emulation setup.
Data string values are useful if you want to concatenate configuration bar codes
(
Ð
Concatenating configuration bar codes) or if you want to send commands directly from
the host terminal to the MicroBar NX in RS-232 Slave Mode (
Ð
RS-232—Slave mode).
Display Data String Mode remains active until you switch off the MicroBar NX.
Display Data String Mode
Example
1. Scan Display Data String Mode.
2. Read a configuration bar code—the Code 39 activation code
(
Ð
Symbologies—Code 39) for example.
The following data string will be displayed on your terminal screen:
\41\4C\60\5E
In this example, "\41\4C\60" is the command for Code 39 activation and
"\5E" is the checksum.
Summary of Contents for MicroBar NX
Page 1: ...MB NX RM 00 E 970131 M i c r o B a r N X Reference Manual Preliminary Edition January 1997...
Page 10: ...Contents x Contents MB NX RM 00 E 970131...
Page 177: ...Symbologies EAN 128 MB NX RM 00 E 970131 167 Symbologies EAN 128 Symbologies Code 128 EAN 128...
Page 201: ...MB NX RM 00 E 970131 Number codes 1 2 3 4 5 6 7 8 9 0 End Selection...
