manualshive.com logo in svg

Intermec MicroBar NX, Reference Manual

Share
Download
Intermec MicroBar NX Reference Manual Download Page 156

Symbologies—Activation

146  

MB/NX/RM/00/E/970131

Symbologies—Activation

To optimize the performance of your MicroBar NX and to ensure trouble-free
scanning, do not select symbologies that you do not need.

The symbology activation codes are also provided with the parameters for each
symbology (

Ð

 appropriate 

Symbologies section for your symbology).

Disable All Symbologies

Disable All Symbologies deactivates all the symbologies activated. If you want to deactivate
individual symbologies, use the Not Active codes for each symbology.

Disable All Symbologies does not reset the individual parameter settings for each
symbology. When you reactivate a symbology, you recover the parameter settings stored in
memory for that symbology when it was disabled.

If you want to reset all the individual symbology parameters to their factory default values,
you must scan the Reset Factory Defaults bar code (

Ð

 

Reset all configuration parameters ).

Disable All Symbologies

Summary of Contents for MicroBar NX











































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands