Intermec MicroBar NX Reference Manual Download

Page: 145 / 202

RS-232—Output to host system

MB/NX/RM/00/E/970131

135

XON/XOFF software protocol

This protocol allows the host to control the flow of data from the MicroBar NX.

To interrupt reception of data, the host transmits the XOFF character (ASCII DC3) after the
specified timeout (

RS-232 - Hardware/software protocols timeout). To restart the flow, it

sends the XON character (ASCII DC1).

When XON/XOFF is active, the MicroBar NX beeps after transmission when there is a good
read. You must change this parameter if you want Beep Before Transmission (

Beeps /

Indicator LED - Timing of good read beeps ).

XON/XOFF is exclusive with the ENQ/ACK/NAK and RTS/CTS transmission protocols.

Not Active (*)

Active

Summary of Contents for MicroBar NX











































































































































































































Search results

Summary of Contents for MicroBar NX

Reviews:

Related manuals for MicroBar NX

Brands by name

Popular brands

Intermec MicroBar NX, Reference Manual

Search results

Summary of Contents for MicroBar NX

Reviews:

Related manuals for MicroBar NX

Brands by name

Popular brands