Intermec EasyLan AW02, User Manual

Page: 105 / 126

Appendix A — Console Commands
EasyLAN Wireless User’s Manual 93
General Console Commands (continued)
Command Description
sh poweron
Shows the power on delay (in seconds).
sh serial
Shows the serial number of the EasyLAN Wireless.
sh serve
Shows the EasyLAN Wireless server parameters.
sh serve co
Shows the EasyLAN Wireless server network
statistics, such as Bytes Received and Bytes Sent.
sh servi item
Shows the service parameters. Where item can be
fil
for filters,
nds
for NDS parameters,
pri
service
for the priority of a service,
str
stringnumber
to define the BOT and EOT
strings used in services,
sum servicenumber
for
the basic parameters of a service number.
sh str stringnumber
Shows the BOT and EOT strings used in services.
Where
stringnumber
identifies the string. If you
do not specify a string number, all string definitions
are displayed (but not the expansions).
sh te
Prints the test label or test page.
sh ver
Shows the EasyLAN Wireless firmware version.
unpro
Allows the system manager to temporarily access the
set
commands when the remote console is in
protected mode. Protected mode is enabled when
you configure a console update password with the
set protect password
command.
You can permanently disable this console update
password with the
cl protect
command.
Or you can use the
set default
command to
restore the default configuration (by default, this
password is not enabled). Be aware that restoring the
default configuration resets your network parameters
and you may lose network communications.
ze
Clears and resets the network statistical counters.
TCP/IP Console Commands
These commands let you configure and display TCP/IP parameters.
TCP/IP Console Commands
Command Description
set ip ac status
n.n.n.n
Enables or disables a specified IP address from
accessing EasyLAN Wireless. Where
status is
en
for
enabled,
dis
for disabled, or
all
for enabling all IP
addresses and n is a number from 0 to 255. The
default is an empty list of IP addresses.
set ip ad n.n.n.n
Sets the IP address of the EasyLAN Wireless. Where
n is a number from 0 to 255. The default is
192.0.0.192.