Intermec EasyLan AW02, User Manual

Page: 116 / 126

Appendix A — Console Commands
104 EasyLAN Wireless User’s Manual
Your next step is to change the default IP address (0.0.0.0) for Avalanche
Console to the correct IP address.
SNMP Console Commands
These commands let you configure and display SNMP parameters.
SNMP Console Commands
Command Description
set snmp getcomm string
Gets the name of the community. Where string is
any string of alphanumeric ASCII characters. The
default is public.
set snmp jetad status
Enables or disables compatibility for JetAdmin.
Where
status is
en
for enabled or
dis
for disabled.
The default is enabled.
set snmp setcomm1
string
Sets the name of community 1. Where string is any
string of alphanumeric ASCII characters.
set snmp setcomm2
string
Sets the name of community 2. Where string is any
string of alphanumeric ASCII characters. The
default is pass.
set snmp con string
Sets the System contact string. Where string is any
string of alphanumeric ASCII characters. The
default is NULL.
set snmp loc string
Sets the System location string. Where string is any
string of alphanumeric ASCII characters. The
default is NULL.
sh snmp
Displays the state of the SNMP protocol.