Intermec EasyLan AW02, User Manual

Page: 54 / 126

Chapter 2 — Configuring EasyLAN Wireless
42 EasyLAN Wireless User’s Manual
Network Security Parameters Defined
The default values in the “Network Security Parameters Defined” table are
compatible with the default, out-of-the-box settings for a MobileLAN
access WA2X access point with the embedded authentication server
enabled for TTLS. If you plan to use another access point, you may need
to adjust the parameters.
Network Security Parameters Defined
Parameter Definition Values Default
Encryption Mode Select the encryption your network is using.
WPA2 uses CCMP encryption.
WPA2-WPA uses CCMP for pair-wise encryption
but allows TKIP for group encryption.
Disabled,
WEP 64-bit encryption,
WEP 128-bit encryption,
TKIP,
WPA2,
WPA2-WPA,
Dynamic WEP Disabled
Key Selection Specify which WEP key is active. 1,
2,
3,
4 1
WEP Key Fill in at least one of these fields if you set
Encryption Mode to WEP 64 bit encryption or
to WEP 128 bit encryption .
These values are ignored unless the encryption
mode is 64 or 128 bit WEP.
Hexadecimal value, up to
10 digits for 64-bit WEP
or up to 26 digits for 128-
bit WEP Blank
Authentication
Type Select the type of security that you are
implementing in your wireless network. Intermec
recommends that you do not use Shared Key. Open System,
Shared Key,
TTLS,
LEAP,
PEAP,
PSK Open System
User ID Enter the logon user ID that EasyLAN Wireless
uses to authenticate to the 802.1x-enabled
network. The user ID must be in the
authentication server database. String of alphanumeric
ASCII characters anonymous
Password Enter the logon password that EasyLAN Wireless
uses to authenticate to the 802.1x-enabled
network. The password must be in the
authentication server database. String of alphanumeric
ASCII characters Blank
Certificate
Common Name 1 Enter the name of the certificate on the primary
authentication server. If the common name is
blank, all certificates are accepted. String of alphanumeric
ASCII characters Blank
Certificate
Common Name 2 Enter the name of the certificate on the secondary
authentication server. String of alphanumeric
ASCII characters Blank