Interlogix TruVision TVR-1104-1T/EA, User Manual

Page: 96 / 158

10BChapter 11: Playing back a recording
90 TruVision DVR 11 and DVR 11c User Manual
- Back : Click to return to the previous window.
Motion search
You can quickly and easily search playback recording for incidents of motion
detection. Motion can be searched over the whole playback window or just for
specific areas on it. This allows you to search, for example, whether any motion
was detected a few days ago near a particular door.
The option is not available in instant playback.
Figure 29: Motion search toolbar
1. Full screen detection : The motion-sensitive red grid automatically appears over the whole
window.
2. Delete all : Delete the motion grid.
3. Search : Search the playback recording for motion detection.
4. Exit : Quit motion search mode and return to play back.
To search for motion in playback:
1. In playback mode right-click the mouse and click Motion Search on the
mouse menu. The motion search toolbar appears and the playback control
toolbar disappears.
2. Select an area of the window to be searched:
Drag the mouse over the desired area. A red grid appears. More than one
area can be selected.
- Or -
Click the full-screen detection icon in the toolbar. The whole window is
covered in the red grid.
3. Click the Search icon in the toolbar to see the results.
Motion appears as blue lines below the green playback progress bar (see
below). If motion had been recorded as an event, it appears as yellow on the
progress bar.
Click the zoom-in button to see the progress bar in closer detail.