Interlogix TruVision TVR-1104-1T/EA User Manual Download Page 11

Page: 11 / 158

1BChapter 2: Installation

TruVision DVR 11 and DVR 11c User Manual

Figure 1

: TVR 11 back panel connections (16-channel model shown)

1. Loop through for up to 16 analog cameras

(depends on DVR model).

2. Connect to a RS-232 device.

3. Connect up to four alarm input cables to

relay outputs.

4. Connect one alarm relay output.

5. Connect four audio inputs to RCA

connectors.

6. Connect up to 16 analog cameras to BNC

connectors (depends on model of DVR).

7. Connect to an optional USB device such as

a mouse, CD/DVD burner or HDD. The
DVR supports both a USB DVD and a USB
HD on the front and rear USB ports.

8. Connect one CCTV monitor (CVBS

connector).

9. Connect to a HDTV. The HDMI connection

supports both digital audio and video.

10. Connect to a VGA monitor.

11. Connect to speakers for audio output.

12. Connect to a network.

13. Connect to a RS-485 device such as a PTZ

camera or a keypad.

14. Connect to the PSU (12 VDC).

15. Power switch (on/off).

16. Connect to ground.

Summary of Contents for TruVision TVR-1104-1T/EA































































































































































Search results

Summary of Contents for TruVision TVR-1104-1T/EA

Reviews:

Brands by name

Popular brands

Interlogix TruVision TVR-1104-1T/EA, User Manual

Search results

Summary of Contents for TruVision TVR-1104-1T/EA

Reviews:

Brands by name

Popular brands