Chapter 13: Alarm and event setup
TruVision NVR 11 User Manual
113
Option
Description
10. Enable Panel Arming Event
Select this checkbox to enable the panel arming event. When
the panel is armed, it will be reported to the recorder.
11. Actions
Click the
button to set up the actions linked to the panel
arming alarm. Go to step 3.
Set up the panel disarming alarm parameters:
12. Enable Panel Disarming
Event
Select this checkbox to enable the panel disarming event.
When the panel is disarmed, it will be reported to the recorder.
13. Actions
Click the
button to set up the actions linked to the panel
disarming alarm. Go to step 3.
3. To define the actions for the heartbeat, panel arm and panel disarm alarms that are
reported by the intrusion panel, click
Action
and each of the tabs:
Trigger Channel:
Select the cameras that will record when an alarm event is received.
The cameras will record following the main stream (alarm) parameters.
The recordings will be 10 seconds for each assigned camera.
Arming Schedule:
Define the alarm schedule for the actions. You can schedule up to
eight periods in a day. Default is 24 hours.
Actions:
Check the required action that needs to be executed when an alarm is
received:
Full-screen Monitoring
Enable Alarm Audio
Notify the alarm host (supported by TruVision Navigator 7.0 and
higher)
Send Email
Upload Snapshots to FTP
Trigger Alarm Output
PTZ Linking:
Select the PTZ camera as well as the preset, preset tour, or shadow
tour that is triggered when the alarm/event is detected.