![background image](http://html1.mh-extra.com/html/interlogix/truvision-nvr-11/truvision-nvr-11_user-manual_2077072089.webp)
Chapter 10: Camera setup
TruVision NVR 11 User Manual
85
Figure 26: PTZ configuration window
Table 13: Description of the PTZ Presets/Tours configuration window
Name
Description
1.
Save Preset
Saves preset.
2.
Call Preset
Calls up pre-existing preset.
3.
Shadow Tour toolbar
Starts recording the shadow tour.
Saves the shadow tour.
Starts the selected shadow tour.
Deletes the selected shadow tour.
4.
Preset Tour toolbar
Adds a step to a selected preset tour.
Starts the selected preset tour.
Stops the selected preset tour.
Deletes all the preset tour steps.
Scroll up the list.
Scroll down the list.
5.
Preset control panel
To set up a preset:
1. From the menu toolbar, click
Camera Setup
>
PTZ Presets/Tours
.
2. Use the directional, zoom, focus and iris buttons to position the analog camera in
the desired preset location.
3. Check
Save
Preset
and enter a preset number (1 to 255). The preset is enabled
and stored in the camera.