Chapter 4: Operating instructions
24
TruVision NVR 11 User Manual
Item
Description
18. Eject
Eject the CD or DVD disk. Does not apply to TVN 11.
19. Archive
Press once to enter quick archive mode. Press twice to start archiving.
Aim the remote control at the IR receiver located at the front of the unit to test
operation.
To change the address of the remote control to the recorder:
1. Press the
Menu
button on the front panel or right-click the mouse and select the
Menu
button. The default display menu window appears.
2. Click
Device Management
>
General Settings
.
3. Check the remote control ID value. The default value is 255. This device address is
valid for all IR controls.
Note
: The recorder will respond to any remote control that has an address between
1 and 255.
4. On the remote control press the
Device
button.
5. Enter the device address value. It must be the same as that on the recorder.
6. Press the
OK
button on the remote control.
To place batteries into the IR remote control:
1. Remove the battery cover.
2.
Insert the batteries. Make sure that the positive (+) and negative (−) poles are
correctly placed.
3. Replace the battery cover.
Troubleshooting the remote control
If the IR remote control is not functioning properly, perform the following tests:
• Check the battery polarity.
• Check the remaining charge in the batteries.
• Check that the IR remote control sensor is not masked.
If the problem still exists, please contact your administrator.
Menu overview
The recorder has an intuitive structure that allows you to configure the unit’s
parameters quickly and efficiently. Each command icon displays a window that lets you
edit a group of settings. Most menus are available only to system administrators.