CHAPTER 7 |
Upgrades & Keycodes
7. From the
‘Add feature, press enter’ screen you will need to press the enter key. You are now at the screen where
you will enter your keycode.
8. On this screen you will need to change the twelve (12) zeros to match the characters in your keycode. This is done by
using the left and right arrow keys to change to the required character and using the enter key to accept that character
and move on to the next.
Note:
The keycodes are case sensitive. It is important to use upper or lower case characters where required. Holding down the left or right arrow key
will
allow you to scroll through all available characters quickly.
9. Once you have correctly entered the keycode, the last
‘enter’ press will display a new screen that shows the
keycode has been accepted and the MOH feature has been enabled.
10. You will now need to reset the
SBX
2
unit for the new features to take effect. Your
SBX
2
unit is now ready to use
the MOH port upgrade you have purchased.
Note:
T
o reset the unit either cycle the power or select SYSTEM > SYSTEM RESET > RESET.
Interalia
|
SBX
2
System Manual
Page 78
