CHAPTER 2 |
Installing the SBX
2
Caution:
The cabling of the
SBX
2
to the PBX should only be completed by a qualified telecommunications
technician. Standard electrostatic discharge precautions must be followed when handling any internal
components.
STD ESD handling precautions should be observed.
Interalia
®
cannot be held responsible for damage to parts or equipment caused by improper handling or installation.
Cabling Activities
1. Ensure that the appropriate preparations are taken before cabling the
SBX
2
. See
Preparing to Cable the SBX2
on
page 9.
2. Cable the communication ports to the appropriate connections. See
SBX2 Port Descriptions and Cabling Instructions
on
page 11.
3. Connect and wire the appropriate
SBX
2
analog ports. See the following for more information:
•• Cabling SBX2 Analog Ports
on page 15.
••
Understand PBX operating modes. See
About SBX2 Operating Modes
on page 17.
Preparing to Cable the SBX
2
To properly cable the various communication port connections, as well as to wire and connect
SBX
2
analog ports to the
PBX, you should ensure that the following prerequisites have been met:
••
Ensure that all system requirements have been met. See
Meeting System Requirements
on page 6.
••
Ensure that the appropriate cables are available for connecting and wiring the
SBX
2
.
As always, cables should be properly managed during
SBX
2
connecting and wiring, and properly stored after installation.
••
Understand the PBX table conventions used in this chapter. See
PBX Interface Table Conventions and
Abbreviations
on page 9
PBX Interface Table Conventions and Abbreviations
The following color abbreviations are used in the PBX interface tables
:
Abbreviation Cable Color Abbreviation Cable Color
Blk
Black
Grn
Green
Brn
Brown
Blu
Blue
Red
Red
Vlt
Violet
Org
Orange
Slt
Slate
Yel
Yellow
Wht
White
Interalia
|
SBX
2
System Manual
Page 9
