Interaction Edge IPMI reference
43
Interaction Edge IPMI reference
This section contains reference information for the pages and their included controls in the Intelligent Platform
Management Interface (IPMI). This section includes the following topics:
To use IPMI, you must connect the
Interaction Edge appliance to one or more networks.
System
The
System
area contains pages that display summary information for the IPMI and power control options for
the Interaction Edge appliance. This area contains the
System
and
System Information
pages, which are
identical.
This page contains the following controls:
Item
Description
Firmware Revision
This control displays the version number of the IPMI firmware
that is currently used.
Firmware Build Time
This control displays the date when the firmware was created.
IP address
This control displays the Internet Protocol (IP) address of the
IPMI network interface (the DIAG port on the front of the
Interaction Edge appliance).
MAC address
This control displays the Media Access Control address of the
IPMI network interface.
Remote Console Preview
This control displays the view of the operating system on the
Interaction Edge appliance. You can start a remote session
that enables you to interact with the Interaction Edge
operating system by selecting
Remote Control
>
Console
Redirection
.
Power Control via IPMI
This set of controls enables you to control the power state of
the Interaction Edge appliance.
Server Health
This area enables you to view pages that display the following information: