50
Interaction Edge IPMI reference
Reset Server
option
This control enables you to restart the server as though
you selected the
Restart
feature from the operating
system. This is considered a "warm boot" or "soft
restart".
Power Off Server –
Immediate
option
This control enables you to shut down the Interaction
Edge appliance as though you removed all power from
the system.
Important!
Interactive Intelligence does not recommend
using this option on a functioning Interaction
Edge appliance as it could cause problems with
the operating system, different aspects of the
Interaction Edge appliance, or the Interaction
Gateway software. You should use this option
only if the Interaction Edge appliance is in an
unresponsive state.
Power Off Server – Orderly
Shutdown
option
This control enables you to shut down the Interaction
Edge appliance as though you selected the
Shutdown
feature through the operating system.
Power On Server
option
This control enables you to start the Interaction Edge
appliance after a shutdown.
Power Cycle Server
option
This control enables you to have the Interaction Edge
appliance shut itself down as though you selected the
Shutdown
feature from the operating system. It is then
immediately restarted. This is a considered a "cold boot"
or a "hard restart".
Perform Action
button
This control enables you to issue the selected power
command to the Interaction Edge appliance.
Maintenance
This area enables you to do maintenance tasks on the IPMI. It contains the following tabs:
Firmware Update
This tab displays the
Firmware Update
page, which enables you to place the IPMI in a state that allows you
to apply a new revision of firmware for the IPMI device.
This page contains the
Enter Update Mode
button, which enables you to place the IPMI device in a state in
which the firmware for the device can be updated.
This page contains the following controls:
Item
Description
