Interactive Intelligence Interaction Edge Installation And Configuration Manual Download

Page: 25 / 62

Interaction Edge setup

Note:

The default administrator user name and password are

admin

and

1234

The

Status

System

page is displayed.

For the product that you want to start, select the associated expandable button next to the product name
in the

Services

list.

In the viewable area under the product name, select the

Start

button.

The product service is started.

After the service starts, select the associated

Configure

hyperlink on the right side of the row.

The web interface for the selected product is displayed.

In the upper right corner of the page, select the

Help

icon.

Use the displayed documentation to install the license file for the selected product.

When you selected the

Start

button for the product, Interaction Edge changed the product service to start

automatically when Interaction Edge restarts.

If you purchased a license for an additional product, repeat this procedure for that product.

Apply the latest Interaction Edge updates

Periodically, Interactive Intelligence releases updates that contain new features and fix identified problems in
the Interaction Edge appliance or its hosted software products.

Important!

The latest information on updates for Interaction Edge and its hosted software products is available in
the

Interaction Edge Updates

whitepaper on the Interaction Edge product information website

(

http://my.inin.com/products/edge/pages/default.aspx

Summary of Contents for Interaction Edge































































Search results

Summary of Contents for Interaction Edge

Reviews:

Related manuals for Interaction Edge

Brands by name

Popular brands

Interactive Intelligence Interaction Edge, Installation And Configuration Manual

Search results

Summary of Contents for Interaction Edge

Reviews:

Related manuals for Interaction Edge

Brands by name

Popular brands