Network Video Recorder
User Manual
UI System Setting
206
Issue V4.6 (2021-05-12)
Figure 7-92
Firmware update
Step 3
Click import configuration or export configuration to view the message “ A
re you sure to
import the configuration?”
user should make flash driver is working.
Step 4
The tip will show on screen, click
ok
to ensure choice.
Step 5
Click
Import Config
to import the configuration to flash drive.
Step 6
Import the configuration, the device would restart immediately.
Step 7
Click
Export
Config
to export the configuration from flash drive.
When the NVR finishes updating, the device would restart.
Network packet capture: the NVR is plugged the USB disk, click the network packet capture, and
set the relevant parameters of the packet capture. The captured data can be downloaded and used for
device problem analysis.
FW Update, firmware update; user plug in the U disk with the update software, choose the file to
update.
Save running log: user should plug in the U disk to save the running log.
----End
