IntelLink INTIPCK825TH User Manual Download

Page: 77 / 327

Network Video Recorder

Quick Navigation

User Manual

Issue: V4.6 (2021-05-12)

Figure 6-18

Backup screen

You can view the detail information of backup. Click delete button to quit the download.

----End

6.4

AI Recognition

At AI recognition interface, we can set the

Real time Comparison, Smart search, Archives

library, Comparison configuration

The all snapshots support to add to the libraries according the real needs

6.4.1

Real Time Comparison

Real time comparison can compare human faces, vehicle license plate, and AI(include riding,

vehicle, full body )

6.4.1.1

Human Face

At real time comparison interface, click the

to enter the human face comparison interface,

choose the cameras with face recognition function to play live video, the snapshots of camera

will compare with the templates which has been registered in libraries, the result shows as in

Figure 6-19.

Summary of Contents for INTIPCK825TH








































































































































































































































































































































Search results

Summary of Contents for INTIPCK825TH

Reviews:

Related manuals for INTIPCK825TH

Brands by name

Popular brands

IntelLink INTIPCK825TH, User Manual

Search results

Summary of Contents for INTIPCK825TH

Reviews:

Related manuals for INTIPCK825TH

Brands by name

Popular brands