Network Video Recorder
System Setting
User Manual
Issue: V4.6 (2021-05-12)
295
Click
to save the time zone setting. Click
to return to previous
setting.
Step 6
Set DST.
1.
Click DST to enter the DST setting interface, click DST button to enable, as shown in
Figure 9-59. The button is disable by default.
Figure 9-59
DST setting interface
Select a start time from the drop-down list.
Select an end time from the drop-down list.
Select an offset time from the drop-down list.
Figure 9-60
Sync camera time
Enable sync camera time, the cameras of NVR management will be showing the same time.
Set the frequency of checks (minimum 10s).
Step 7
Click
to save the DST setting. Click
to return to previous
setting.
