IntelLink INTIPCK825TH User Manual Download Page 88

Page: 88 / 327

Network Video Recorder
User Manual

Quick Navigation

Issue V4.6 (2021-05-12)

6.4.2.6

Personnel Count

Figure 6-31

Personnel count

Step 1

Choose personnel count at smart search interface.

Step 2

Tick the AI recognition camera channels, set statistical type and date.

Step 3

Click “Search” to search the snapshot of human face.

Step 4

Click

to view the data by different manners.

6.4.3

Archives Library

At archives library, user can add or edit the face library , license plate library.

The license plate libraries can be import to and export from IP cameras.

Summary of Contents for INTIPCK825TH








































































































































































































































































































































Search results

Summary of Contents for INTIPCK825TH

Reviews:

Related manuals for INTIPCK825TH

Brands by name

Popular brands

IntelLink INTIPCK825TH, User Manual

Search results

Summary of Contents for INTIPCK825TH

Reviews:

Related manuals for INTIPCK825TH

Brands by name

Popular brands