Intel SR1530HSH - Server System - 0 MB RAM, User Manual

Page: 106 / 178

86 Intel
®
Server System SR1530SH/SR1530HSH User’s Guide
Removing the Rack Handles
1. Observe the safety and ESD precautions at the beginning of this book. See “Safety
Information” on page iii .
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. If it is installed, remove the front bezel. For instructions, see
“Removing the Front
Bezel” on page 22 .
4. Remove the two screws holding the rack handle in place, and remove the rack
handle from the server system as shown in Figure 79.
Figure 79. Removing the Rack Handle
5. Repeat Step 4 on the opposite side of the system.
6. (Optional) Install the front bezel, if desired. For instructions, see
“Installing the
Front Bezel” on page 23 .
7. Plug all peripheral devices and the AC power cable into the server.
AF001204