Intel SR1530HSH - Server System - 0 MB RAM, User Manual

Page: 39 / 178

Intel
®
Server System SR1530SH/SR1530HSH User’s Guide 19
Clearing the CMOS
If you cannot access the BIOS setup screens, you must use the CMOS Clear jumper to
reset the configuration RAM.
1. Power down the system and disconnect the AC power.
2. Open the server.
3. Move the jumper from the normal operation position, CMOS Clear by BMC, at
pins 1 and 2 to the CMOS Clear Force Erase position, covering pins 2 and 3.
Figure 10. Clear CMOS Jumper
4. Reconnect the AC power and power up the system.
5. When the system begins beeping, power it down and disconnect the AC power.
6. Return the CMOS Clear jumper to the CMOS Clear by BMC location, covering
pins 1 and 2.
7. Close the server chassis.
8. Reconnect the AC power and power up the system.
Note: Refer to the Technical
Product Specification for
Diagnostic LED decoder list.
NIC 1
USB
USB
NIC 2
Serial
VGA
MS
KB
SATA 1
SATA 0 Floppy SysFan 2
SysFan 3
LSB MSB
BIT 2 BIT 3
Diagnostic LEDs
DIMM A1 DIMM A2 DIMM B1 DIMM B2
CPU Socket
SATA 2 SysFan 4
CPU Power
SysFan 1
CPUFan 1
PCI Express* x8 (x8 Lane) Slot 5 PCI Express* x8 (x4 Lane) Slot 3
PCI Express* x16 (x8 Lane) Slot 6
PCI 5V (32bit/33MHz) Slot 1 PCI 5V (32bit/33MHz) Slot 2
Main
Power
Front Panel
Header
External
USB
Battery
IPMB
HSBP
Internal
USB
SATA 5
SATA 4
SATA 3
Serial
Port B
Intel
®
82566 E NIC Controller (optional)
A
C
B
D
LED LED State NIC State
Right 100 Mbit/sec data rate is selected.
Off 10 Mbit/sec data rate is selected.
LAN activity is occurring.
Left
On
On
Blinking
LAN link is established.
Off
Color
N/A
Green
Green
LAN link is not established.
NIC1 LED Functions
1000 Mbit/sec data rate is selected.
On Yellow
LED LED State NIC State
Right LAN link is established.
Off LAN link is not established.
1000 Mbit/sec data rate is selected.
Left On
On
On
100 Mbit/sec data rate is selected.
Off
Color
N/A
Green
Green
10 Mbit/sec data rate is selected.
NIC2 LED Functions
LAN activity is occurring. Blinking
Yellow
3
2
Default
CLEAR
CMOS
J1E3
CMOS
Clear
Power LED
HDD LED
Reset
Button
Power
Button
NIC 2
Link/Act
NIC 1
Link/Act
Front Panel
Header (J1K2)
24 23
2
A Not Available on the Intel
®
Server Board S3200SHV.
B
Not Available on the Intel ® Server Board S3200SHV.
C Intel
®
Adaptive Slot 6 functions as either a PCI Express* x16
(x8 lane) Connector or a Riser Card Slot in a 1U Chassis.
D Not Available on the Intel ® Server Board S3200SHV.
Update
J1E2
Password
Clear
3
2
Default
Remove jumper for BIOS recovery
J1E1
BIOS
Recovery
3
2
Default
J1B2
Chassis
Intrusion
2
Default
Update
J1B1
BMC
FRC
Update
3
2
Default
J1C2
BMC
Boot
Block WP
3
2
Default
SGPIO