Intel SR1530HSH - Server System - 0 MB RAM, User Manual, Page: 105 / 178

Intel
®
Server System SR1530SH/SR1530HSH User’s Guide 85
Installing and Removing the Rack Handles
Installing the Rack Handles
1. Observe the safety and ESD precautions at the beginning of this book. See “Safety
Information” on page iii .
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. If it is installed, remove the front bezel if it is installed. For instructions, see
“Removing the Front Bezel” on page 22 .
4. Attach the rack handle to the server system with two screws as shown in Figure 78.
Figure 78. Installing the Rack Handle
5. Repeat Step 4 on the opposite side of the server.
6. (Optional) Install the front bezel, if desired. For instructions, see
“Installing the
Front Bezel” on page 23 .
7. Plug all peripheral devices and the AC power cable into the server.
AF001204