Intel SR1530HSH - Server System - 0 MB RAM, User Manual, Page: 59 / 178

Intel
®
Server System SR1530SH/SR1530HSH User’s Guide 39
8. Position the drive with the drive connectors facing up as shown in Figure 30.
9. Set the drive carrier over the drive, as shown by the letter “A” in the figure. The
data and power connectors must be positioned so they are accessible through the
cut-out as shown by letter “B”.
10. Use the four screws provided to attach the drive to the carrier. See letter “C” in
Figure 30.
Figure 30. Installing Drive into Drive Carrier (SR1530SH)
11. Set the drive assembly into place in the chassis. See letter “A” in Figure 31.
12. Attach the drive assembly to the chassis side with two screws. See letter “B” in
Figure 31.
13. Attach the drive assembly to the chassis with the screw you removed in Step 6. See
letter “C” in Figure 31.
Note: You must install the assembly that contains the optical drive bracket at the left side of the
system.
Figure 31. Install Drive Assembly into the Server System (SR1530SH)
AF000668
B
C
A
HDD 0
HDD 1
AF002323
B
A
C