Intel SR1530HSH - Server System - 0 MB RAM, User Manual

Page: 28 / 178

8
Intelfi Server System SR1530SH/SR1530HSH User s Guide
The NIC LEDs at the right and left of NIC2 provide the following information:
Peripheral Devices (SR1530SH)
The server system provides locations and hardware for installing hard drives, slimline
CD-ROM drive, or DVD-ROM drive. You must purchase the drives separately. Available
options include:
•
Slimline Optical Drive Bay
•
Hard Disk Drive Bay HDD0 (located under the slimline optical drive bay)
•
Hard Disk Drive Bay HDD1
Peripheral Devices (SR1530HSH)
The server system provides locations and hardware for installing hard drives, slimline
CD-ROM drive, or DVD-ROM drive. You must purchase the drives separately. Available
options include:
•
Slimline Optical Drive Bay
•
Hard Disk Drive Bay
Hard Disk Drives
The Intel
®
Server System SR1530SH/SR1530HSH provides six SATA ports. The six
SATA ports are near the front left side of the server board. For instructions on installing
hard drives, see “Installing and Removing a Hard Drive (SR1530SH)” on page 37 .
Note: Each drive can consume up to 17 W of power. Drives must be specified to run at a
maximum ambient temperature of 45
°
C.
Note: The Intel
®
Server System SR1530SH / SR1530HSH does not support all Serial ATA
(SATA) hard drives. See “Server System References” on page x for an Internet link to a
list of supported hardware.
Table 4. NIC2 LED Descriptions
LED LED State Description
Left Off 10 Mbps connection (if right LED is on or blinking)
Solid Green 100 Mbps connection
Solid Amber 1000 Mbps connection
Right Off No network connection
Solid Green Network connection in place
Blinking Green Transmit/receive activity