background image

Intel

® 

Server System SR1530SH/SR1530HSH User’s Guide

115

Appendix D: Safety Information

English

Server Safety Information

This document applies to Intel

®

 server boards, Intel

®

 server chassis (pedestal and rack-

mount), and installed peripherals. To reduce the risk of bodily injury, electrical shock, fire, 

and equipment damage, read this document and observe all warnings and precautions in 

this guide before installing or maintaining your Intel

®

 server product.

In the event of a conflict between the information in this document and information 

provided with the product or on the website for a particular product, the product 

documentation takes precedence.

Your server should be integrated and serviced only by technically qualified persons.

You must adhere to the guidelines in this guide and the assembly instructions in your 

server manuals to ensure and maintain compliance with existing product certifications and 

approvals. Use only the described, regulated components specified in this guide. Use of 

other products/components will void the UL Listing and other regulatory approvals of the 

product, and may result in noncompliance with product regulations in the region(s) in 

which the product is sold.

Safety Warnings and Cautions

To avoid personal injury or property damage, before you begin installing the product, 

read, observe, and adhere to all of the following safety instructions and information. The 

following safety symbols may be used throughout the documentation and may be marked 

on the product and/or the product packaging.

CAUTION

Indicates the presence of a hazard that may cause minor personal injury or 
property damage if the CAUTION is ignored.

WARNING

Indicates the presence of a hazard that may result in serious personal injury 
if the WARNING is ignored.

Indicates potential hazard if indicated information is ignored.

Indicates shock hazards that result in serious injury or death if safety 
instructions are not followed.

Indicates hot components or surfaces.

Summary of Contents for SR1530HSH - Server System - 0 MB RAM



















































































































































































Reviews: