Intel SR1520ML - Server System - 0 MB RAM, User Manual

Page: 69 / 160

Intel
®
Server System SR1520ML User’s Guide 49
9. Install the system memory. For instructions, see “Installing DIMMs” on page 30 .
Notes:
•
Use caution when connecting cables to make sure you do not pinch any cables.
•
For data cable routing information, see “Cable Routing” on page 71 .
•
For power cable routing information, see “Cable Routing” on page 71 .
10. Connect the cables at the front of the server board.
— Main power. The cable end is labeled P1 for the server board at the right and P2
for the server board at the left. Several cables lay underneath this connector. Be
sure the cables do not get pinched in the connector. See letter “A” in the
following figure.
— Front panel (letter “E”)
— Sys_fan_3 (letter “D”)
11. Connect the cables at the rear of the server board.
— USB_2_3 (letter “C”)
— SATA_0 (letter “B”)