Intel SR1520ML - Server System - 0 MB RAM, User Manual

Page: 36 / 160

16 Intel
®
Server System SR1520ML User’s Guide
Note: The server system does not support all hard drives. See “Server System References” on
page xix for an Internet link to a list of supported hardware.
Installing a Hard Drive
Note: If you are replacing a hard drive, see “Removing a Hard Drive” on page 18 for
instructions first. Return to these steps when directed.
1. Observe the safety and ESD precautions at the beginning of this book. See “Safety
Information” on page iii .
2. Power down the server. Unplug all peripheral devices and the AC power cable.
3. Remove the server system cover. For instructions, see “Removing the Server
System Cover” on page 14 .
4. Remove the screws that hold the hard drive bracket to the system. See letter “A” in
the figure below. For easiest access to the screws on the right side of the hard drive
bracket, lift the power supply from the system.
5. Lift the drive carrier from the system. See letter “B” in the figure.
Figure 10. Removing Drive Carrier from the Server System
A
B
AF002600