Intel SR1520ML - Server System - 0 MB RAM, User Manual

Page: 39 / 160

Intel
®
Server System SR1520ML User’s Guide 19
Figure 13. Removing Drive Carrier
6. Disconnect the power and data cables from the drive.
7. Remove the four screws that attach the hard drive to the drive carrier. Lift the drive
from the carrier. Store the drive in an anti-static bag.
8. If you are installing a new drive, skip the remaining steps and refer to “Installing a
Hard Drive” on page 16 . Begin with step 6.
9. Insert the screws that held the drive in the carrier into the screw locations on the
carrier to store them for future use.
10. Set the drive assembly into place in the chassis. See letter “A” in the figure below.
11. Attach the drive assembly to the chassis with the screws that you removed earlier.
See letter “B” in the figure below.
AF002603
A
B