Intel SR1520ML - Server System - 0 MB RAM, User Manual

Page: 45 / 160

Intel
®
Server System SR1520ML User’s Guide 25
— Install an add-in card. For instructions, see “Installing a PCI Add-in Card” on
page 26 .
— Install the PCI riser assembly into the server system. For instructions, see
“Installing the PCI Riser Assembly” on page 22 .
Installing a PCI Riser Card
1. Observe the safety and ESD precautions at the beginning of this book. See “Safety
Information” on page iii .
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the server system cover. For instructions, see “Removing the Server
System Cover” .
4. Disconnect any cables attached to any add-in cards.
5. Remove the PCI riser assembly. For instructions, see “Removing the PCI Riser
Assembly” on page 21 .
6. Remove any add-in cards from the PCI riser connector. For instructions, see
“Removing a PCI Add-in Card” on page 27 .
7. Use two screws to attach the riser card to the riser assembly. See the figure below.
Figure 18. Installing Riser Card onto Riser Assembly
8. Choose the appropriate action:
— Install a PCI add-in card if desired. For instructions, see “Installing a PCI Add-
in Card” on page 26 .
— Install the PCI riser assembly into the server system. For instructions, see
“Installing the PCI Riser Assembly” on page 22 .
AF002650
B
A