Intel SE7520AF2 Technical Product Specification Download Page 139

Page: 139 / 256

Intel® Server Board SE7520AF2 TPS

System BIOS

Revision 1.2

139

Intel order number C77866-003

5.14.1.1 In

DOS

−

The flash bootable disk must have ROM image and AFUDOS.EXE.

−

Enter in DOS.

−

Run AFUDOS /i<ROM filename> [/n] [/p[b][n][c]].

5.14.1.2

In Microsoft* Windows*

−

The flash disk must have ROM image, AMIFLDRV.SYS and AFUWIN.EXE.

−

Run command AFUWIN /i<ROM filename> [/n] [/p[b][n][c]].

5.14.1.3 In

LINUX

−

The flash disk must have ROM image and AFULNX.

−

Run command ./afulnx /i<ROM filename> [/n] [/p[b][n][c]].

5.14.1.4

In EFI Shell

−

The flash disk must have ROM image and AFUEFI.

−

Boot to EFI Shell with the flash disk.

−

Do a map -r to obtain the file system on the disk.

−

Change drive to the flash disk. E.g., if the flash disk is fs0:, type fs0: at the prompt.

−

Run command afuefi [/n] [/p[b][n][c]] <ROM filename> to perform the update.

5.14.1.5

AFU Utility Switches

The AFUxxx utilities must be used on the following format: ‘afuXXX /i<ROM filename> [/n]
[/p[b][n][c]] [/r<registry_path>] [/s] [/k] [/q] [/h]’; where:

/n - don't check ROM ID

/pbnc

b - Program Boot Block

n - Program NVRAM

c - Destroy System CMOS

/r - registry path to store result of operation (only for Windows version)

/k - Program non-critical block only

/s - leave signature in BIOS

/q - silent execution

/h - print help

Summary of Contents for SE7520AF2

































































































































































































































































Search results

Summary of Contents for SE7520AF2

Reviews:

Brands by name

Popular brands

Intel SE7520AF2, Technical Product Specification

Search results

Summary of Contents for SE7520AF2

Reviews:

Brands by name

Popular brands