Intel S2600IP, Technical Product Specification

Page: 63 / 186

Intel® Server Board S2600IP and Intel® Workstation Board W2600CR TPSPlatform Management Overview
Revision 1.1 49
Intel order number G34153-003
Table 11. Basic and Advanced Features
Feature Basic Advanced
IPMI 2.0 Feature Support X X
In-circuit BMC Firmware Update X X
FRB 2 X X
Chassis Intrusion Detection X X
Fan Redundancy Monitoring X X
Hot-Swap Fan Support X X
Acoustic Management X X
Diagnostic Beep Code Support X X
Power State Retention X X
ARP/DHCP Support X X
PECI Thermal Management Support X X
E-mail Alerting X X
Embedded Web Server X X
SSH Support X X
Integrated KVM X
Integrated Remote Media Redirection X
Lightweight Directory Access Protocol (LDAP) X X
Intel
®
Intelligent Power Node Manager Support X X
SMASH CLP X X
4.1.3 Integrated BMC Hardware: Emulex* Pilot III
4.1.3.1 Emulex* Pilot III Baseboard Management Controller Functionality
The Integrated BMC is provided by an embedded ARM9 controller and associated peripheral
functionality that is required for IPMI-based server management. Firmware usage of these
hardware features is platform dependent.
The following is a summary of the Integrated BMC management hardware features that
comprise the BMC:

400MHz 32-bit ARM9 processor with memory management unit (MMU)

Two independent10/100/1000 Ethernet Controllers with Reduced Media Independent
Interface (RMII)/ Reduced Gigabit Media Independent Interface (RGMII) support

DDR2/3 16-bit interface with up to 800 MHz operation

16 10-bit ADCs

Sixteen fan tachometers

Eight Pulse Width Modulators (PWM)

Chassis intrusion logic

JTAG Master

Eight I
2
C interfaces with master-slave and SMBus* timeout support. All interfaces are
SMBus* 2.0 compliant.

Parallel general-purpose I/O Ports (16 direct, 32 shared)

Serial general-purpose I/O Ports (80 in and 80 out)

Three UARTs

Platform Environmental Control Interface (PECI)