manualshive.com logo in svg

Intel S1200BT, Service Manual, Page: 75 / 122

Share
Download
Intel S1200BT Service Manual Download Page 75

Intel® Server Board S1200BT Service Guide

59

Figure 33. BEV Device Order Screen

Add EFI Boot Option

The Add EFI Boot Option screen allows the user to add an EFI boot option to the boot 

order. This screen is only available when there is at least one EFI bootable device present 

in the system configuration. The “Internal EFI Shell” Boot Option is permanent and 

cannot be added or deleted.

To access this screen from the 

Main

 screen, select 

Boot Options

 > 

Add EFI Boot 

Option

. To move to another screen, press the 

<Esc>

 key to return to the 

Boot Options

 

screen, then select the desired screen.

Figure 34. Add EFI Boot Option Screen

Delete EFI Boot Option

The Delete EFI Boot Option screen allows the user to remove an EFI boot option from the 

boot order. The “Internal EFI Shell” Boot Option will not be listed, since it is permanent 

and cannot be added or deleted.

To access this screen from the 

Main

 screen, select 

Boot Options

 > 

Delete EFI Boot 

Option

. To move to another screen, press the 

<Esc>

 key to return to the 

Boot Options

 

screen, then select the desired screen.

Summary of Contents for S1200BT



























































































































Reviews:

No comments