manualshive.com logo in svg

Intel S1200BT, Service Manual, Page: 50 / 122

Share
Download
Intel S1200BT Service Manual Download Page 50

34

Intel® Server Board S1200BT Service Guide

17. Interrupt Remapping

Option Values:Enabled

Disabled

Help Text:

Enable/Disable Intel

®

 VT-d Interrupt Remapping support.

Comments:This option only appears when Intel

®

 Virtualization Technology for Directed 

I/O is Enabled.

18. ATS Support

Option Values:Enabled

Disabled

Help Text:

Enable/Disable Intel

®

 VT-d Address Translation Services (ATS) support.

Comments:This option only appears when Intel

®

 Virtualization Technology for Directed 

I/O is Enabled. Appears only on Romley boards. 

19. Pass-through DMA Support

Option Values:Enabled

Disabled

Help Text:

Enable/Disable Intel

®

 VT-d Pass-through DMA support.

Comments:This option only appears when Intel

®

 Virtualization Technology for Directed 

I/O is Enabled.

20. MLC Streamer

Option Values:Enabled

Disabled

Help Text:

MLC Streamer is a speculative prefetch unit within the processor(s).

Note: Modifying this setting may affect performance.

Comments:MLC Streamer is normally Enabled for the best efficiency in L2 Cache and 

Memory Channel use, but disabling it may improve performance for some processing 

loads and on certain benchmarks. For more information. 

Summary of Contents for S1200BT



























































































































Reviews:

No comments